Why Is There No Water in My Toilet Tank? 

Did you just try to flush your toilet, and nothing occurred? Peek into the tank, and you may see no water inside. Before you panic, rest easy that fixing this challenge is usually simple. If you can’t complete this yourself, you can always schedule toilet repair with a knowledgeable plumber. Follow these tips to diagnose and repair the problem of no water in the toilet tank. 

Check the Water Supply 

The first action is to make sure the water is turned on. If you or someone in your household recently completed a toilet repair, you most likely turned off the water first. Did you neglect to turn it back on? To see, rotate the water shut-off valve on the wall in back of the toilet. If the valve was closed, water ought to now start refilling the tank. If this does not work, test the water at your sink or a different plumbing fixture. If nothing comes out from the tap, you could possibly have a larger water supply issue. Contact your water company to learn more. 

Reposition or Replace the Float Mechanism 

Older toilet models use a float ball to determine the water level as it rises in the tank. When the ball passes a certain height, the float arm it’s joined to stops the water flow. However, insufficient water could enter the tank if the ball is positioned improperly or the arm is faulty. To correct the float ball, start by removing the toilet tank cover. Bend the float arm up slightly to change where it sits in the tank. If this does not fix the problem, you might need to replace the whole float mechanism. You should be able to complete this yourself by following the directions that come with the replacement parts, or you can employ a plumber for help. Just note that float balls are old toilet technology. You may appreciate improved durability and efficiency if you upgrade the existing tank components or replace the toilet entirely. 

Adjust the Fill Valve 

More recent toilets use a float cup instead of a float ball, coupled with a fill valve and water level rod. There could quite possibly be no water in the toilet tank because the valve has slipped out of place or become plugged. Here are a few]] {tips to consider: 

• Test the fill valve: Have a look inside the toilet and identify the fill valve on top of a vertical tube device on the left side of the tank. Make sure it’s secure and evenly attached to the tube. Then, change the water level. Newer toilets have an adjustment knob you can turn with your hand, while older versions may require you to loosen an adjustment screw with a flathead screwdriver. Flush the toilet and make it possible for the tank refill to check the water level. Change it until the water comes to {about|approximately|roughly]] one inch below the top of the overflow tube. 
• Clean the fill valve: Mineral buildup and other crud might be clogging the valve and stopping your toilet from filling. Turn off the water behind the toilet and take off the fill cap. Then, gradually turn the water back on, cupping your hand over the valve to prevent water from spraying everywhere. After several seconds, turn the water back off. Finally, wash the fill cap to clear away hard water buildup. If the cap is cracked, replace it. 
• Clean the valve tube: The tube below the fill valve may also be blocked. Shut off the water and take off the valve hardware. Then, stick a slim bottle brush or wire down the tube. Turn the water back on just a little to flush away the junk. Replace the valve hardware and flush the toilet to test your efforts. 

Repair or Replace the Trip Assembly 

If you’ve tried the steps above without success, the final possibility is a damaged trip assembly. This component links the flush handle to the tank. If it’s not working or positioned improperly, the flush cycle may not complete, leaving the tank void. Take off the toilet tank lid and examine the trip assembly fastened to the handle. If it’s out of place, reposition it. If the assembly is bent, worn or broken, replace it. Whether you complete the job yourself or leave it to a plumber, this uncomplicated repair should get your toilet tank filled with water once more. 

Schedule Toilet Repair Today 

You can’t go long without a working toilet, so call [Company name] to schedule a toilet repair. We can determine why your toilet isn’t filling and recommend the appropriate fix. If your plumbing fixture is old and worn out, our team can install a high-efficiency toilet in your home. Be assured that every plumbing repair and replacement we perform is backed by a 100% satisfaction guarantee. To schedule a visit from one of our licensed team members, please contact your local Service Experts Heating, Air Conditioning & Plumbing office today.