When the mercury starts to rise outdoors, you expect your air conditioner to keep your residence cozy. Your AC could be running, but the air issuing from your vents feels too hot.
Here are the most common reasons why this occurs and what you need to do about it. If you have to have air conditioning repair in Albany, the Experts at Roland J. Down Service Experts can help. Like always, all our AC repair work is supported by a 100% Satisfaction Guarantee.*
1.Your Thermostat is Set Wrong
Check the fan setting. If it is switched to “on,” the fan will run even when the AC compressor isn’t going. This isn’t a problem, but your cooling bills will be bigger if the fan is on frequently. Switch the setting to “auto,” and the blower will only run when the compressor is working. This also means the air issuing from the vents will consistently feel cold.
2.Filter is Dirty
The HVAC air filter traps airborne particles that can wear out your heating and cooling system. If it ends up being too clogged, it can restrict airflow. This reduces how much warm air goes over the indoor evaporator coil. If the refrigerant flowing through the coil becomes too cool, it freezes, stopping the cooling cycle from taking place. To stop this, replace the filter every month or as suggested by the manufacturer.
3.Refrigerant is Low
Refrigerant is the key to air conditioning. It transitions from a low-pressure gas to a high-pressure liquid as it cycles between the indoor evaporator coil and outdoor condensing unit. If refrigerant is leaking, your air conditioner will run poorly and may not create enough cool air. It can also cause a frozen evaporator coil, which as we mentioned before, halts the cooling cycle fully. You’ll need aid from an HVAC tech, like one from Roland J. Down Service Experts , to solve any refrigerant leaks.
4.Condensing Unit is Dirty
The outdoor component of your AC system is known as a condenser. This is actually a large heat sink that removes humid air from your residence. If the metal fins are covered with yard debris, the condenser can’t work efficiently. Wash down the system to eliminate accumulated debris and cut back grass to make sure the condenser can “breathe.”
5.Condenser Fan or Compressor has Gone Bad
While you’re inspecting the condenser, confirm the big fan on the top of the equipment is going. If the fan motor has stopped working, the condensing unit can’t break up heat like it should, and your air conditioner may start circulating hot air into your house.
Pay attention to the sound of the compressor operating within the condensing unit also. This is what drives your air conditioner, as the piece cools the refrigerant. Then, the refrigerant can collect more warmth when it circulates back into your home. If the compressor stops working, you’ll likely need to purchase a new system and schedule air conditioning installation.
If you’re hearing other odd noises when your equipment is cooling, take a look at our guide that deciphers what common air conditioning noises mean.
Did you fix the trouble using these tips? If not, our Roland J. Down Service Experts Experts are here to help you. Get in touch with us at 518-417-2938 or contact us online to request your air conditioning repair appointment right away.