Updated: June 14, 2018
If your air conditioner was installed before 2010 and you don’t know what R22 is then you should probably read up. R22 refrigerant is a chemical that keeps the air coming from your air conditioning system cool, so it’s undoubtedly incredibly critical. Most air conditioning units older than 10 years use an AC refrigerant called R22 that’s commonly identified as Freon*, and is stated by the EPA as HCFC-22. In this article, we’ll use the name R22. This refrigerant was introduced in the 1950s and became the main AC refrigerant in the residential heating and cooling industry.
The Montreal Protocol
Several decades later the world realized that R22 refrigerant was aiding in the depletion of the Earth’s ozone layer. Not cool. So, the U.S. EPA, in cooperation with other agencies and groups around the world, began a phase out of several ozone-depleting agents as part of an international agreement known as the Montreal Protocol. The regulation lists many HCFCs and CFCs (different types of refrigerants that deplete the ozone layer), but R22 is considered one of the worst offenders.
Timeline and R22 phase out progress in 2018
In 2003, the phase out of R22 production and imports commenced. By early 2010 the production and import of R22 decreased. However, servicing current, existing equipment is still permitted while there is an available supply of R22. To guarantee the public’s compliance with the new law, all sales of R22 must be acquired by a certified technician. Production and import of R22 will be continually reduced by law until 2020, when all production and import will be eliminated. Only recycled R22 refrigerant will be available to service existing air conditioners after 2020.
The graph above shows the EPA’s consumption allowance of R22 by percentage. The limits on R22 consumption were implemented in 2010 and follow a declining trend until 2020.
So how does this affect prices?
If this sounds like a case study on supply and demand, then you are correct. As you might assume, older air conditioners could more frequently experience leaks and need repairs. Any air conditioners that are older than 2010 are more likely to use R22, which means there’s a lot more demand for it, and a very limited supply. Prices have only gone up due to scarcity.
Remember that in order to buy R22, you’ll need to be an EPA-certified technician. So, the average homeowner can’t purchase a cylinder themselves. Also, there are some firm regulations now on how refrigerant must be reclaimed and recycled, which adds to the cost. This fee is passed on to the homeowner as companies are forced to cover the increased overhead connected to R22 repairs. There are requirements for importing, labeling, record keeping, reporting, destruction and reclaiming of R22 from existing units.
So, how will this affect you?
The cost of R22 is dramatically increasing because of the diminishing supply, and new refrigerant will no longer be available for use at all after 2020, except from recycled quantities.
If you’re thinking, “Holy cow, this is starting to sound expensive,” you’re correct, it is. This is why when our technicians come out to inspect your unit we look to see what refrigerant your unit uses, and lots of cases, we’ll advise an upgrade due to the increasing cost of sustaining an R22 air conditioner.
How do I know if my unit uses R22?
If your home has an air conditioning system that was built before 2010, your AC will likely have R22. However, if you installed your air conditioner after January 1, 2010, then your system may not have R22. You can find the type of refrigerant your system runs on by looking at the appliance’s nameplate. This nameplate is usually found on the outdoor condenser of your central air conditioning system. If you can’t locate it, you can check your user’s manual. If that doesn’t work either, you can reach out to your local Service Experts center. If you have a maintenance agreement with us, we also have your information on hand and a tech can let you know quickly if your unit uses R22.
Instead of Freon, use Puron
The industry has moved from R22 to R410a, which you may recognize by the brand name Puron. In the remainder this article, we’ll use the name R410a (although Puron is a well-known brand, there are other companies that make R410a). There are some key benefits to switching from an R22 air conditioning unit to one that uses R410a. It provides a higher safety rating and an ozone depletion rating of zero, and it performed slightly better on energy-efficiency tests than R22.
The truth about “drop-ins” is that there is no “drop-in” solution where you simply swap out the refrigerant.
You may have read about “drop-in” replacements for R22. We strongly recommend against this choice. Usually a homeowner who is concerned about the cost of replacing their system seeks out an alternative, and this appears to be an easy solution. It typically costs the homeowner more money, and almost always voids the manufacturer warranty. The fact about “drop-ins” is that there is no “drop-in” solution where you merely swap out the refrigerant. The phrase “drop-in” is indicating retrofitting a unit, which when done properly can cost the homeowner as much, or more, money than buying a new unit that uses R410a. In part, this is because different refrigerants operate at different pressure levels and require different parts to run, which forces the technician to replace the most expensive components of your system to fit with the new refrigerant. If this vital step is skipped, your system will quickly stop working, and you’ll end up installing a new unit anyway.
Your manufacturer will probably not pay for the parts to make this switch because retrofitting your AC system will likely void the warranty. It’s usually just a temporary fix, but buying a new upgraded AC system will probably benefit most homeowners in dependability, satisfaction, and long-term comfort.
It’s wise to discuss pricing options with your HVAC provider if you’re worried about cost. At Service Experts Heating & Air Conditioning, we provide financing plans that make a replacement doable, and we watch for any manufacturer and utility rebates that would make it easier to swallow an unforeseen replacement. To avoid emergencies on a hot day, lots of our customers elect to do a pre-emptive replacement, and replace an old AC before it doesn’t work. If you’re thinking the same thing, then you’re in good company!
If your unit was built after 2010, you’re probably safe
If your heating and air conditioning system was built after January 2010, the R22 phase out problem may not apply to you, because it’s likely that your system uses the new, approved replacement refrigerant, R410a. However, units installed after 2010 could still use R22, so it’s ideal to check with an HVAC Expert. You can always check for this and the refrigerant type by checking the nameplate on your condenser (the condenser is the outside unit).
What do I do if my air conditioner uses R22?
To recap, if your HVAC equipment was produced prior to January 2010, especially if it’s older than a decade, you have these options:
- Shop for an upgraded, more environmentally-friendly system that uses R410a.
- Call an expert to replace the parts in your current air conditioner to help make it compatible with an approved air conditioner refrigerant. This is not what we recommend.
- Remain using recycled R22 and burn cash like it’s the ozone layer.
To be clear, the EPA regulates the production and use of this refrigerant, but not your system. You aren’t required by law to replace your air conditioner. At some point, your AC will not work and it will need to be replaced, and only R410a units will be available for sale.
The best option is to buy a new, upgraded air conditioner, particularly if your current air conditioner is already more than 10 years old. Service Experts Heating & Air Conditioning has lots of financing options that help to meet your budget, and again, we look out for rebates from HVAC manufacturers and local utilities to make it even easier. New AC equipment is more efficient and present you superior comfort, helping to decrease your energy costs.
You could also pick the status quo and continue using recycled R22 air conditioning refrigerant for the foreseeable future. While this sounds like a nice alternative, the price of servicing old R22 A/C systems is starting to surpass several hundred dollars (easily a down payment on a new system). You may also see the prices climb as demand continues to rise on a substance that is no longer produced or widely accessable.
If you aren’t aware of what type of AC refrigerant your air conditioning system uses, let us help. Call Service Experts Heating & Air Conditioning today and we can provide an inspection to confirm if you are currently using R22 and, if so, what you can do.
The good news
While making the move to an approved AC refrigerant may intimidating, it’s helping to save the ozone layer. These regulations will help defend the ozone layer in the Earth’s atmosphere, which helps block radiation from the sun and prevents serious illnesses, such as skin cancer. It’s not exaggerated to say that you, as a homeowner, are a big part of this by replacing an old R22 unit with a newer, ozone friendly unit.
If you have any questions, please reach us for a free, in-home consultation by filling out the form below.
*Freon is a registered trademark of the DuPont Corporation